Paracord collar – Dignis Direction Classic handmade, made to size – the given circumference of the dog’s neck is punched at +/- the middle (third) of the five holes. The holes are spaced every 1 cm in the axes. Collar width +/- 2 cm.
CHECK HERE our other paracord collar models
Collar personalization: possibility to engrave any text (permanent laser engraving) on the loop, e.g. dog’s name, contact number, address, etc.
The product can be choosen with or without loop.
The belt loop is not attached to the collar – you can put it anywhere you want. The loop is made of 16 mm wide waterproof tape.
The adapter in the collar is made of 16 mm wide webbing.
The materials of the paracord collar – Dignis Direction Classic – are paracord and strong polyvinyl chloride (PVC) webbing covered with thermoplastic polyurethane (TPU) or natural leather.
The type of paracord used has a diameter of approx. 2 mm. It consists of 7 thin inner fibers, braided with two even thinner ones, placed in a dense braid. Thanks to the fact that the fibers are tightly connected to each other, the paracord is durable – its lifting capacity reaches up to approx. 45 kg (in laboratory conditions). It is made of nylon and polyester. It can be washed by hand (for example, with warm soapy water). Paracord should not be exposed to direct sunlight (it is recommended to dry in room temperature or in the open air).
PVC/TPU tapes are resistant to water, sweat, chemicals, UV radiation, weather, bacteria and do not wipe fur. The outer layer of the tapes is not abraded, and its properties remain constant regardless of temperature. The material is easy to maintain (it can be cleaned with soapy water), and despite its thickness, it remains flexible.
Natural vegetable-tanned leather, dyed with non-toxic water-based dyes and properly protected with natural fats and wax.
NATURAL LEATHER CARE:
- if the leather gets wet, allow it to dry naturally;
- from time to time apply a bit of wax to leather to help maintain its functionality and natural appearance;
- leather is a natural material – its surface may show slight differences in color, small imperfections – that is its charm;
- do not let the leather get soak up with water – it may cause loss of elasticity, leave marks on the leather.
The paint used to color the engraver may wear off (in particular, washing with hot water and brushing and using detergents is discouraged). Washing with a damp cloth is recommended.
Chicago-type screws are used in the creation of the collars, while brass fittings are brass rivets.
Black, rosegold and neochrome fittings are lacquered – the lacquer will wear off depending on how and how intensively the product is used. These elements are subject to corrosion.
Brass fitting will work well in contact with salt water – it is resistant to rust.
We do not have stock – accessories are made to individual customer order. Non-refurbished product – not returnable.
The colors shown may vary slightly in reality – this depends on individual screen brightness settings.
Reviews
There are no reviews yet.